1, bed structure

Adopt high rigid cast iron, resin sand technology, bed foot and bed overall structure has the characteristics of smooth chip removal, compact structure, beautiful shape and so on.

2, row knife type tool rest

The new row knife type tool rest makes the error of repeated tool change is ±3um, the tool change speed is accurate, which can greatly save the processing time.

3, precision feed

The feed axis is fully servo-driven, using Taiwan Yintai linear guide rail, machining accuracy and long time accuracy maintenance, the feed axis repeated positioning accuracy <±3um.

4, high efficiency processing

The machine spindle speed is 3000 RPM, the X axis can move up to 15 m/min, the Z axis can move up to 18 m/min, the hydraulic rotary cylinder, precision elastic collet. Improved ability of ductile material cutting and strong cutting.

5, strong cooling

High power cooling pump, greatly improve the cutting of the product, according to customer requirements can be installed 1--4 cooling pipe, cooling performance is good.

Network optimization data:

The processing technology of CNC lathe is similar to that of ordinary lathe, but CNC lathe is a clamping continuous automatic processing to complete all the turning procedures, therefore, attention should be paid to the following aspects:

Choose tools wisely.

Rough car, should choose high strength, good durability tool, in order to meet the rough car on the big back knife, large feed requirements;

Second, when finishing the car, the tool should be selected with high accuracy and good durability, and the composition of the CNC machine tool can meet the requirements of machining accuracy.

Three, in order to reduce the time for tool change and convenient tool alignment, should try to use machine clamp knife and machine clamp knife. Reasonable choice of cutting amount;

Reasonable choice of cutting amount is of great significance to give full play to the potential of lathe, improve the cutting performance of tool, and realize high quality, high yield, low cost and safe operation.

When roughing, the largest cutting tool should be selected first, and then the largest feed tool of the latest CNC machine tool should be selected, and finally the appropriate cutting speed should be determined. Increasing the amount of feed tool can reduce The Times of cutting, and increasing the amount of feed is conducive to chip breaking. According to the above principles, choosing the cutting amount of rough turning has a certain effect on improving production efficiency, reducing the consumption of tool and reducing the processing cost.