Product banner
Current location : Home >> Products >> Inclined bed CNC machine tool
Tk65-300y inclined rail lathe

Tk65-300y inclined rail lathe

  • Classification:Inclined bed CNC machine tool
  • Number of visits:times
  • Date of Issue:2021-07-16 16:43:46
  • Product overview
  • The performance characteristics of
  • Technical parameters

TK65-300Y斜线轨车床

TK65-300Y斜线轨车床

Network optimization information:

The machining error caused by spindle rotation error varies with different machining methods. The radial rotation error of spindle can cause roundness and cylindricity error of workpiece when machining outer circle and inner hole, but it has no direct effect on the machining of workpiece end face. The axial rotation error has little influence on the outer circle and inner hole, but has great influence on the perpendicularity and flatness of the end face; In the process of thread turning, the main axis deviation can cause the periodic error of thread lead. In the process of machining, properly improving the machining accuracy of spindle and box, selecting second-hand CNC machine tools to recycle high-precision bearings, improving the assembly accuracy of spindle components, balancing high-speed spindle components, preloading rolling bearings, etc. can improve the rotation accuracy of machine tool spindle.

Then there is the guide error, which is the judgment basis of the relative position relationship of the machine parts on the machine tool, and also the basis of the machine tool movement. The accuracy requirements of the machine tool guide mainly include three aspects: the straightness in the horizontal plane, the straightness in the vertical plane, and the parallelism (torsion) of the front and rear guide rails.

In addition to the manufacturing error of the guide rail itself, the heterogeneous wear and installation quality of the guide rail are also important factors causing the recovery error of the second-hand machine tool. The wear of guide is an important reason for the decline of machine tool accuracy. In addition, there is the error at the end of the transmission chain, which refers to the relative motion error between the transmission elements at both ends of the transmission chain, and is usually measured by the angle error at the end of the transmission chain.


TK65-300Y斜线轨车床

technical parameterTK65-300Y
Processing rangeTurning diameter mmΦ650mm
Machining diameter mmΦ500mm
Processing length mmΦ400mm
Workpiece length mmChuck 300 mm / collet 380 mm
Through hole diameter of bar mmΦ40/Φ51(Optional)
Apex distance450mm
tripEffective stroke of x-axis560mm(Diameter measurement)
Effective stroke of z-axisChuck 380mm / collet 460mm
X / Z axis fast moving speed25m/min
X / Z axis rail specification30/30(Roller)
X / Z axis screw diameter / pitch mm3210/3210
X / Z axis servo motor10Nm/10Nm
principal axisSpindle nose typeA2-5/A2-6(Optional)
Diameter of spindle through holeΦ48/Φ66(Optional)
Spindle speedMechanical spindle100-2500rpm
Motorized spindle 100-4500rpm
Spindle motor power11kwMotorized spindle / 11kw (optional)
Specification of chuck and rotary cylinder8 inch chuck 851 / chuck 851 (optional)
accuracyPositioning accuracy of X / Z / Y axis±0.005mm
X / Z / Y axis repeat positioning accuracy±0.005mm
TailstockSpecification of tailstock sleeveMT5/diameterΦ75mm
Tailstock sleeve stroke120mm
Tailstock pressure range8-25pa
Tailstock feed modehydraulic pressure
toolHandle specification20*20
Boring bar specification25mm
Turret (tool position)SHDY16-290YShaft power turret
DimensionsStructure type of bed48 degree overall inclined bed
Length x width x heightmm2215*1600*2110
Machine weightabout3200Kg


The label

0
Contact

Contact person: Xu Zhongyuan and Zheng Ye


Contact number: 0574-86813333


Hand machine: 13867844944


Address: No. 15, Lingnan Sifentou, Xingan Rian Road, Beilun, Ningbo


Contact us at scan

Sitemap | RSS | XML
Copyright © Ningbo Hengjun Machinery Equipment Co., Ltd. All rights reserved Icpcode: 浙ICP备2021015300号
Support: 华企立方