Network optimization data:

The accuracy of the machine tool conforms to the People's Republic of China machinery industry standard JB/T9895.1-1999 "CNC vertical chucking lathe accuracy test". In order to further improve the accuracy of machine tools, our company on the basis of the national standard, the key accuracy of 10%~30% compression, internal control specifications have been formulated.

Note 1: the spindle speed is the standard configuration speed range, when the installation of other configuration of the chuck, fixture or main motor, please pay attention to the selected limit of the chuck or fixture speed.

Note 2: CNC machine tools have high requirements for power supply. If the user power supply voltage fluctuation is more than ±10%, the CNC machine tool production must increase the voltage regulator device, otherwise the CNC machine tool will not be able to work normally, or even produce unpredictable consequences.

The maximum machining length and maximum machining diameter in the instructions are the technical parameters under the standard configuration. If special chuck or tool rest is used, it is necessary to communicate with the technical department of machine tool technical parameters and fill in the relevant information after reaching an agreement.

Note 4: The maximum torque of the machine tool is constant, but when the cutting diameter of the CNC machine tool increases, the cutting parameters that can be met will be reduced, so the machining parameters of the machine tool should be adjusted according to the size of the workpiece.