Features:

1, bed structure

Adopt high rigid cast iron, resin sand technology, bed foot and bed overall structure has the characteristics of smooth chip removal, compact structure, beautiful shape and so on.

2, row knife type tool rest

The new row knife type tool rest makes the error of repeated tool change is ±3um, the tool change speed is accurate, which can greatly save the processing time.

3, feed

The feed axis is fully servo-driven, using Taiwan Yintai linear guide rail, machining accuracy and long time accuracy maintenance, the feed axis repeated positioning accuracy <±3um.

4, high efficiency processing

The machine spindle has a high speed of 3000 RPM, and the rapid movement of the X axis can reach 15 m/min, and the rapid movement of the Z axis can reach 18 m/min. The hydraulic rotary cylinder improves the ability of cutting ductile materials and strong cutting.

5, strong cooling

Powerful cooling power cooling pump, greatly improve the product cutting, according to customer requirements can be installed 1--4 cooling pipe, good cooling performance.

Network optimization data:

The switch.

Low voltage circuit breakers used to be called automatic air switches, but now ECE standard is called low voltage circuit breakers. Low voltage circuit breakers are electrical appliances that integrate the functions of controllers and protection devices, and can effectively protect the electrical equipment connected in series behind them.

Arc suppression device

Eliminate arc to prevent arc break, prevent damage to equipment, improve the switch breaking ability of CNC machine tool industry, and protect personnel safety.

Switch the power.

Because the internal circuit is running in the high-frequency switching state, so its own energy consumption is very low, the power efficiency can reach about 80 percent, almost twice of the ordinary linear regulated power supply, so it is called high efficiency and energy saving power supply. Provide DC power supply for 24V5V machine tools in the circuit.

The keys

The key is generally used to put on or cut off the control circuit, so that the CNC machine tool manufacturing control motor or other electrical operation. Contact which is communicated only once is called normally closed contact and normally open contact.

Note: Part of the switching power supply cover has a switch switch, the input power is 110 and 220V, pay attention to the position of the switch during installation, input the corresponding voltage, otherwise it is easy to damage the switching power supply.